Monday, 28 March 2011


You will need:
  • 300gr White/ opaque Melt and Pour Base (this depends on how big your moulds are and how many you want to make. Determine how big your mould is by putting it on a scale and pouring water into one of the cavities.
  • Colour – I used red and blue
  • Fragrance – 1.5 % of the soap base
  • Aeroplane mould
  • Microwave Jug
  • Rubbing Alcohol to spray bubbles away
  1. Melt your soap base in the microwave in 30 second bursts. When melted add your colour and fragrance and stir gently.
  2. Pour carefully into your moulds and spritz the rubbing alcohol to remove any bubbles.
  3. Allow the soaps to get hard for about 1hour then remove them and repeat the process with the blue colour.
  4. The soaps will need to be wrapped or bagged soon after making or they will start to “sweat”

Pin It!

No comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...